66
SECTION 7
DriveRack
™
Connection to the GUI Interface:
If you elect to utilize the included GUI PC interface, either the 480, 481, 442 or 482 can act as
the master unit that interfaces with the PC. Once the master unit has been established, access
to all other units within the network system can be controlled via the PC. The following illus-
tration shows how to establish connection from the PC to the Master controller to the slaves.
• Before the DriveRack™ unit will communicate with the PC via the GUI interface, the includ-
ed GUI software must be loaded onto the selected PC.
To Next Page
Loading...
