Figure 19. Removing the front bezel
Next step
Replace the front bezel.
Installing the front bezel
Prerequisites
1 Follow the safety guidelines listed in Safety instruction.
2 Locate and remove the bezel key.
NOTE
: The bezel key is part of the front bezel package.
Steps
1 Align and insert the tabs on the right end of the bezel into the slots on the system.
NOTE
: Ensure that the drive bay is locked before installing the front bezel, for more information see closing the drive
bays section.
2 Fit the left end of the bezel onto the system and press the bezel until you hear the release button click.
3 Lock the bezel.
Installing and removing system components
47
To Next Page
Loading...
