Removing and Replacing Parts on the Mini Tower Chassis 6-19
Riser Board
Figure 6-19. Riser Board Removal
To remove the riser board, follow these ste
s:
1. Remove the expansion-card cage and all expansion cards.
2. Place the expansion-card cage on a flat work surface with the riser
board facing up.
3. Remove the riser-board mounting screws.
4. Slide the riser board away from the release handle until it stops; then
lift the riser board away from the expansion-card cage.
riser board
riser-board
mounting screws (2)
expansion-card cage
slots (2)
To Next Page
Loading...
