Removing and Replacing Parts on the Midsize Chassis 5-7
Figure 5-6. 3.5-Inch Front-Panel Insert Removal
To remove a 3.5-inch front-panel insert, follow these steps:
1. Hold the computer cover with the front facing you.
2. Inside the cover, press the eject button mechanism toward the front
panel to snap the plastic insert out of its opening.
To replace the front-panel insert for the 3.5-inch bay, work from outside the
cover. Place the insert in position, and press it into the opening.
front of cover
inside of cover
eject button
mechanism
To Next Page
Loading...
