120 Configuring System Information
•
Current-Active
— Displays the currently active software image.
•
Next-Active
— Displays the software image which will be loaded the next time the switch is rebooted.
Displaying Device Versions Using CLI Commands
For information about the CLI commands that perform this function, see the
System Management
Commands
chapter in the
CLI Reference Guide
: The following table summarizes the equivalent CLI
commands you use to display device versions information.
System Resources
Use the System Resources page to view information about memory usage and task utilization.
To display the System Resources page, click System
→
General
→
System Resources in the tree view.
Table 6-3. Device Versions Commands
CLI Command Description
show boot-version Displays the boot image version details.
show version Displays the system version.
To Next Page
Loading...
