Dell PowerConnect 6224 - DHCP Snooping Persistent Configuration

452 Configuring Switching Information
• VLAN ID — Select the VLAN for which information to be displayed or configured for the DHCP
snooping application.
•
DHCP Snooping Mode — Enables or disables the DHCP snooping feature on the selected VLAN.
The default is Disable.
Displaying the DHCP Snooping VLAN Summary Table
1. Open the DHCP Snooping VLAN Configuration page.
2. Click Show All .
The
DHCP Snooping VLAN Summary table displays.
Figure 7-118. DHCP Snooping VLAN Summary
Configuring DHCP Snooping VLANs With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide :
• DHCP Snooping Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCP Snooping Persistent Configuration
Use the DHCP Snooping Persistent Configuration page to configure the persistent location of the
DHCP snooping database. This location can be local or remote on a given IP machine. For more
information about DHCP bindings and the DHCP Snooping database, see "DHCP Snooping Static
Bindings Configuration" on page 454.
To access the DHCP Snooping Persistent Configuration page, click Switching
→ DHCP Snooping →
Persistent Configuration in the navigation tree.
Table 7-67. DHCP Snooping VLAN Commands
CLI Command Description
ip dhcp snooping Enables DHCP snooping globally or on a specific VLAN.