Dell PowerConnect 6224 - CP Interface Client Status

214 Configuring System Information
Figure 6-82. Client Detail
The Client Detail page contains the following fields:
• MAC Address — The menu lists each associated client by MAC address. To view status information
for a different client, select its MAC address from the list.
•
Client IP Address — Identifies the IP address of the client (if applicable).
•
CP Configuration — Identifies the CP configuration the client is using.
•
Protocol — Shows the current connection protocol, which is either HTTP or HTTPS.
•
Session Time — Shows the amount of time that has passed since the client was authorized.
•
User Name — Displays the user name (or Guest ID) of the connected client.
•
Interface — Identifies the interface the client is using.
•
Verification — Shows the current account type, which is Guest, Local, or RADIUS.
CP Interface Client Status
Use the Interface Client Status page to view clients that are authenticated to a specific interface.
To view statistical information for clients connected to the switch through the captive portal, click
System
→ Captive Portal → Interface Client Status.