Configuring System Information 215
Figure 6-83. Interface - Client Status
The Interface Client Status page contains the following fields:
•
Interface
— The drop-down menu lists each interface on the switch. To view information about the
clients connected to a CP on this interface, select it from the list.
•
MAC Address
— Identifies the MAC address of the client.
•
IP Address
— Identifies the IP address of the client.
•
CP Configuration
— Identifies the captive portal the client used to access the network.
•
Protocol
— Shows the current connection protocol, which is either HTTP or HTTPS.
•
Verification
— Shows the current account type, which is Guest, Local, or RADIUS.
CP Client Status
Use the Client Status page to view clients that are authenticated to a specific CP configuration.
To view information about clients connected to the switch through the a specific captive portal, click
System
→
Captive Portal
→
Client Status.
Figure 6-84. CP - Client Status
The CP - Client Status page contains the following fields:
To Next Page
Loading...
