404 Configuring Switching Information
Figure 7-82. VLAN Querier Summary Table
Configuring VLAN Querier Settings with CLI Commands
See "Configuring IGMP Snooping Querier Settings with CLI Commands" on page 402.
VLAN Querier Status
Use the VLAN Querier Status page to view the IGMP Snooping Querier settings for individual VLANs.
To display the VLAN Querier Status page, click Switching
→
Multicast Support
→
IGMP Snooping
→
VLAN Querier Status in the tree view.
Figure 7-83. IGMP Snooping VLAN Querier Status
The VLAN Querier Status page contains the following fields:
•
VLAN ID
— Identifies the VLAN.
•
VLAN Mode
— Shows whether the IGMP Snooping Querier is enabled or disabled on the VLAN.
To Next Page
Loading...
