Configuring IPv6 655
•
LS Updates Received
— The number of LS updates received on this interface by this router.
•
LS Acknowledgements Sent
— The number of LS acknowledgements sent on this interface by this
router.
•
LS Acknowledgements Received
— The number of LS acknowledgements received on this interface
by this router.
Displaying OSPFv3 Interface Statistics
1.
Open the
OSPFv3 Interface Statistics
page.
2.
Select the interface to display from the
Interface
drop-down menu.
Statistics for the interface display.
Displaying OSPFv3 Interface Statistics Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
OSPFv3 Neighbors
Use the OSPFv3 Neighbors
page to display the OSPF neighbor configuration for a selected neighbor ID.
When a particular neighbor ID is specified, detailed information about that neighbor is given. Neighbor
information only displays if OSPF is enabled and the interface has a neighbor. The IP address is the IP
address of the neighbor.
To display the page, click IPv6
→
OSPFv3
→
Neighbors in the tree view.
Table 10-18. OSPFv3 Interface Statistics Commands
CLI Command Description
show ipv6 ospf interface stats Displays the statistics for a specific interface.
To Next Page
Loading...
