Dell PowerConnect 6224 - DAI ACL Rule Configuration

Configuring Switching Information 443
• ARP ACL Name — Use this field to create a new ARP ACL for Dynamic ARP Inspection. The name
can be 1 to 31 alphanumeric characters in length.
Displaying the DAI ACL Summary Table and Removing an Entry
1. Open the DAI ACL Configuration page.
2. Click Show All .
The
Dynamic ARP Inspection ACL Summary table displays.
Figure 7-110. Dynamic ARP Inspection ACL Summary
3. To remove an ARP ACL from the list, select the Remove option in the appropriate row, and then click
Apply Changes .
Configuring Dynamic ARP Inspection DAI ACL With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
the
CLI Reference Guide :
• Dynamic ARP Inspection Commands
The following table summarizes the equivalent CLI commands for this feature.
DAI ACL Rule Configuration
Use the DAI ARP ACL Rule Configuration page to add or remove DAI ARP ACL Rules.
To display the DAI ARP ACL Rule Configuration page, click Switching
→ Dynamic ARP Inspection →
ACL Rule Configuration in the navigation tree.
Table 7-61. Dynamic ARP Inspection DAI ACL Commands
CLI Command Description
arp access-list Creates an ARP ACL.
show arp access-list Displays the configured ARP ACLs with the rules.