Dell PowerConnect 6224 - General IGMP Snooping

398 Configuring Switching Information
To display the IGMP Snooping page, click Switching → Multicast Support → IGMP Snooping in the
tree view. Use this page to go to the following features:
• General IGMP Snooping
• Global Querier Configuration
• VLAN Querier
• VLAN Querier Status
• MFDB IGMP Snooping Table
General IGMP Snooping
Use the General IGMP snooping page to add IGMP members.
To display the General IGMP snooping page, click Switching
→ Multicast Support → IGMP Snooping →
General in the tree view.
Figure 7-77. General IGMP Snooping
The General IGMP snooping page contains the following fields:
• Interface — Selects the Unit and Port, LAG, or VLAN to be affected.
•
Auto-Learn — Enables or disables Auto-Learn on the switch.
•
Host Timeout — Specifies time before an IGMP snooping entry is aged out. The default time is 260
seconds.
•
Multicast Router Timeout — Specifies time before aging out a Multicast router entry. The default
value is 300 seconds.