Dell PowerConnect 6224 - Page 131

Configuring System Information 131
Figure 6-11. Add Authentication Key
3. Define the fields as needed.
4. Click Apply Changes .
The SNTP authentication key is added, and the device is updated.
Displaying the Authentication Key Table
1. Open the SNTP Authentication page.
2. Click Show All .
The
Authentication Key Table page displays:
Figure 6-12. Authentication Key Table
Removing an Authentication Key
1. Open the SNTP Authentication page.
2. Click Show All .
The
Authentication Key Table page displays.
3. Select an Authentication Key Table entry by checking its the Remove check box.
4. Click Apply Changes .
The entry is removed, and the device is updated.