Dell PowerConnect 6224 - Page 228

228 Configuring System Information
Figure 6-94. Add Remote User
3. Define the relevant fields.
4. Click Apply Changes .
5. The user is added to the group, and the device is updated.
Viewing the User Security Model Table
1. Open the SNMPv3 User Security Model (USM) page.
2. Click Show All .
The
User Security Model Table displays:
Figure 6-95. User Security Model Table
Removing a User Security Model Table Entry
1. Open the User Security Model page.
2. Click Show All .
The
User Security Model Table page displays.
3. Select an entry.