Dell PowerConnect 6224 - Page 235

Configuring System Information 235
Figure 6-102. Notification Recipients
The Notification Recipients page contains the following fields:
• Recipient IP — Contains a user-defined list of notification recipients IP addresses.
•
Notification Type — The type of notification sent. The possible field values are:
–
Trap — Traps are sent.
–
Inform — Informs are sent.
•
SNMPv1,2 — SNMP versions 1 or 2 are enabled for the selected recipient. The possible field values
are:
–
Community String — Displays the community string to be sent with the notification.
–
Notification Version — Determines the notification version. The possible field values are:
•
SNMP V1 — SNMP version 1 traps are sent. If Inform is selected as the Notification Type,
SNMPv1 cannot be selected.
•
SNMP V2 — SNMP version 2 traps or informs are sent.
•
SNMPv3 — SNMP version 3 is enabled for the selected recipient. The possible field values are:
–
User Name — Select the existing user to generate notifications.
–
Security Level — The security level attached to notifications. The possible field values are:
•
NoAu NoPriv — The packet is neither authenticated nor encrypted.