Configuring System Information 265
Figure 6-119. OSPFv2 Trap Flags
The OSPFv2 Trap Flags page contains the following fields:
•Error Traps
–
Authentication Failure
— Signifies that a packet has been received on a non-virtual interface from
a router with an authentication key or authentication type that conflicts with this router's
authentication key or authentication type. The factory default is disabled.
–
Bad Packet
— Signifies that an OSPF packet has been received on a non-virtual interface that
cannot be parsed. The factory default is disabled.
–
Configuration Error
— Signifies that a packet has been received on a non-virtual interface from a
router with configuration parameters that conflict with this router's configuration parameters. The
factory default is disabled.
To Next Page
Loading...
