Dell PowerConnect 6224 - Page 341

Configuring Switching Information 341
Modifying GARP Timers Settings for Multiple Ports
1. Open the GARP Timers page.
2. Click Show All .
The
GARP Timers Table displays.
3. Click Edit for each Interface to modify.
4. Edit the GARP Timers fields as needed.
5. Click Apply Changes .
The GARP Timers settings are modified, and the device is updated.
Defining GARP Timers Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• GVRP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-20. GARP Timer Commands
CLI Command Description
garp timer Adjusts the GARP application join, leave, and leaveall GARP timer
values.
show gvrp configuration Displays GVRP configuration information, including timer values,
whether GVRP and dynamic VLAN creation is enabled, and which
ports are running GVRP.