Dell PowerConnect 6224 - Page 380

380 Configuring Switching Information
2. Select Enable in the GVRP Global Status field.
3. Click Apply Changes .
GVRP is enabled on the switch.
Enabling VLAN Registration Through GVRP
1. Open the GVRP Global Parameters page.
2. Select Enable in the GVRP Global Status field for the desired interface.
3. Select Enable in the GVRP Registration field.
4. Click Apply Changes .
GVRP VLAN Registration is enabled on the port, and the device is updated.
Displaying the GVRP Port Parameters Table
1. Open the GVRP Global Parameters page.
2. Click Show All .
The
GVRP Port Parameters Table displays.
Figure 7-66. GVRP Port Parameters Table
3. Use the Unit drop-down menu to view the GVRP Port Parameters Table for other units in the stack, if
they exist.
Copying GVRP Parameters
1. Open the GVRP Global Parameters page.
2. Click Show All .
The
GVRP Port Parameters Table displays.