EasyManua.ls Logo

Dell PowerConnect 6224 - Page 559

Dell PowerConnect 6224
786 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Routing 559
Figure 9-27. IP Helper Statistics
The IP Helper Statistics page contains the following fields:
DHCP Client Messages Received
— The number of valid messages received from a DHCP client.
The count is only increased if IP helper is enabled globally, the ingress routing interface is up, and the
packet passes a number of validity checks, such as having a TTL >1 and having valid source and
destination IP addresses.
DHCP Client Messages Relayed
— The number of DHCP client messages relayed to a server. If a
message is relayed to multiple servers, the count is increased once for each server.
DHCP Server Messages Received
— The number of DHCP responses received from the DHCP server.
This count only includes messages that the DHCP server unicasts to the relay agent for relay to the
client.
DHCP Server Messages Relayed
— Specifies the number of DHCP server messages relayed to a client.
UDP Client Messages Received
— The number of valid UDP packets received. This count includes
DHCP messages and all other protocols relayed. Conditions are similar to those for the first statistic in
this table.
UDP Client Messages Relayed
— The number of UDP packets relayed. This count includes DHCP
messages relayed as well as all other protocols. The count is increased for each server to which a packet
is sent.
DHCP Client Messages Hop Count Exceeded Max
— The number of DHCP client messages
received whose hop count is larger than the maximum allowed. The maximum hop count is a
configurable value.A log message is written for each such failure. The DHCP relay agent does not relay
these packets.

Table of Contents

Other manuals for Dell PowerConnect 6224

Related product manuals