Configuring IPv6 611
Configuring IPv6 Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-1. IPv6 Routing Global Commands
CLI Command Description
ipv6 forwarding Enables IPv6 forwarding on a router.
ipv6 icmp error-interval Limits the rate at which ICMP error messages are sent.
ipv6 unicast-routing Enables forwarding of IPv6 unicast datagrams.
show ipv6 brief Displays the IPv6 status of forwarding mode and IPv6 unicast routing
mode.
To Next Page
Loading...
