Configuring IP Multicast 779
Figure 12-44. BSR Candidate Summary
The BSR Candidate Summary page contains the following fields:
•
BSR Address
— Displays the IP address of the elected bootstrap router (BSR).
•
BSR Priority
— Displays the priority value of the elected BSR.
•
BSR Hash Mask Length
— Displays the mask length of the elected BSR.
•
BSR Expiry Time
— Time (in hours, minutes, and seconds) in which the learned elected BootStrap
Router (BSR) expires.
Viewing the BSR Candidate Summary Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• PIM-DM or PIM-SM Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-40. PIM BSR Candidate Configuration Commands
CLI Command Description
show ipv6 pimsm bsr Displays the bootstrap router (BSR) information.
To Next Page
Loading...
