Dell PowerEdge R740xd - Page 131

Figure 77. Removing the expansion card from expansion card riser 2
Figure 78. Removing the expansion card from expansion card riser 3
Next steps
1 Install the expansion card into expansion card riser.
2 If you are removing the card permanently, install a metal ller bracket over the empty expansion slot opening and push the expansion
card latch.
NOTE
: You must install a ller bracket over an empty expansion card slot to maintain Federal Communications
Commission (FCC) certication of the system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airow inside the system.
Installing and removing system components 131