Figure 108. Installing optional IDSDM/vFlash card
Next steps
1 Install the MicroSD cards.
NOTE
: Reinstall the MicroSD cards into the same slots based on the labels you had marked on the cards during
removal.
2 If applicable, install the rear drive cage.
3 If applicable, install the full height PCIe card.
4 Follow the procedure listed in After working inside your system.
Related link
Installing the micro SD card
Installing expansion card into expansion card riser
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the exibility of selecting dierent network
connectivity options.
Removing the network daughter card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the expansion card riser 2 or the rear drive cage, depending on the conguration of your system.
156
Installing and removing system components