Removing an intrusion switch
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the cooling fan assembly.
Step
Press the intrusion switch and slide it out of the intrusion switch slot.
Figure 31. Removing an intrusion switch
Next step
Install an intrusion switch.
Related link
Removing the cooling fan assembly
Installing an intrusion switch
Installing an intrusion switch
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the tabs on the intrusion switch with the slots on the cooling fan assembly.
2 Push the intrusion switch until it locks in place.
Installing and removing system components
81
To Next Page
Loading...
