EasyManua.ls Logo

Dell S4048-ON - Intermediate System to Intermediate System (IS-IS); Routing Information Protocol (RIP)

Dell S4048-ON
1146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Intermediate System to Intermediate System (IS-IS)
The following table lists the Dell Networking OS support per platform for IS-IS protocol.
Table 120. Intermediate System to Intermediate System (IS-IS)
RFC# Full Name S-Series
1142 OSI IS-IS Intra-Domain Routing Protocol (ISO DP
10589)
1195 Use of OSI IS-IS for Routing in TCP/IP and Dual
Environments
2763 Dynamic Hostname Exchange Mechanism for IS-IS
2966 Domain-wide Prex Distribution with Two-Level IS-
IS
3373 Three-Way Handshake for Intermediate System to
Intermediate System (IS-IS) Point-to-Point
Adjacencies
3567 IS-IS ACruythpetongtircaapthioicn
3784 Intermediate System to Intermediate System (IS-
IS) Extensions in Support of Generalized Multi-
Protocol Label Switching (GMPLS)
5120 MT-ISIS: Multi Topology (MT) Routing in
Intermediate System to Intermediate Systems (IS-
ISs)
5306 Restart Signaling for IS-IS
5308 Routing IPv6 with IS-IS 8.3.10.0
draft-ietf-isis-igpp2p- over-lan-06 Point-to-point operation over LAN in link-state
routing protocols
draft-kaplan-isis-e xt-eth-02 Extended Ethernet Frame Size Support
Routing Information Protocol (RIP)
The following table lists the Dell Networking OS support per platform for RIP protocol.
Table 121. Routing Information Protocol (RIP)
RFC# Full Name S-Series
1058 Routing Information Protocol 7.8.1
2453 RIP Version 7.8.1
4191 Default Router Preferences and More-Specic
Routes
8.3.12.0
1132 Standards Compliance

Table of Contents

Related product manuals