Dell S4048-ON - Configure GVRP; Related Configuration Tasks

• Congure GVRP Registration
• Congure a GARP Timer
• RPM Redundancy
Congure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. Then, GVRP conguration is per interface on a switch-by-switch
basis. Enable GVRP on each port that connects to a switch where you want GVRP information exchanged. In the following example, GVRP
is congured on VLAN trunk ports.
Figure 43. Global GVRP Conguration Example
Basic GVRP conguration is a two-step process:
1 Enabling GVRP Globally
2 Enabling GVRP on a Layer 2 Interface
Related Conguration Tasks
• Congure GVRP Registration
• Congure a GARP Timer
360
GARP VLAN Registration Protocol (GVRP)