Dell S4048-ON - Enabling 802.1 X

Enabling 802.1X
Enable 802.1X globally.
Figure 7. 802.1X Enabled
1 Enable 802.1X globally.
CONFIGURATION mode
dot1x authentication
2 Enter INTERFACE mode on an interface or a range of interfaces.
INTERFACE mode
interface [range]
3 Enable 802.1X on the supplicant interface only.
INTERFACE mode
dot1x authentication
Examples of Verifying that 802.1X is Enabled Globally and on an Interface
Verify that 802.1X is enabled globally and at the interface level using the show running-config | find dot1x command from
EXEC Privilege mode.
92
802.1X