Dell S4048-ON User Manual

• To view the available ash memory using SNMP, use the following command.
snmpget -v2c -c public 192.168.60.120 .1.3.6.1.4.1.6027.3.10.1.2.9.1.6.1
enterprises.6027.3.10.1.2.9.1.5.1 = Gauge32: 24
The output above displays that 24% of the ash memory is used.
MIB Support to Display the Software Core Files
Generated by the System
Dell Networking provides MIB objects to display the software core les generated by the system. The chSysSwCoresTable contains the list
of software core les generated by the system. The following table lists the related MIB objects.
Table 95. MIB Objects for Displaying the Software Core Files Generated by the System
MIB Object OID Description
chSysSwCoresTable 1.3.6.1.4.1.6027.3.10.1.2.10 This is the table that contains the list of
software core les generated by the system.
chSysCoresEntry 1.3.6.1.4.1.6027.3.10.1.2.10.1 Entry number.
chSysCoresInstance 1.3.6.1.4.1.6027.3.10.1.2.10.1.1 Stores the indexed information about the
available software core les.
chSysCoresFileName 1.3.6.1.4.1.6027.3.10.1.2.10.1.2 Contains the core le names and the le
paths.
chSysCoresTimeCreated 1.3.6.1.4.1.6027.3.10.1.2.10.1.3 Contains the time at which core les are
created.
chSysCoresStackUnitNumber 1.3.6.1.4.1.6027.3.10.1.2.10.1.4 Contains information that includes which
stack unit or processor the core le was
originated from.
chSysCoresProcess 1.3.6.1.4.1.6027.3.10.1.2.10.1.5 Contains information that includes the
process names that generated each core
le.
Viewing the Software Core Files Generated by the System
• To view the software core les generated by the system, use the following command.
snmpwalk -v2c -c public 192.168.60.120 .1.3.6.1.4.1.6027.3.10.1.2.10
enterprises.6027.3.10.1.2.10.1.1.1.1 = 1
enterprises.6027.3.10.1.2.10.1.1.1.2 = 2
enterprises.6027.3.10.1.2.10.1.1.1.3 = 3
enterprises.6027.3.10.1.2.10.1.1.2.1 = 1
enterprises.6027.3.10.1.2.10.1.2.1.1 = "/CORE_DUMP_DIR/flashmntr.core.gz"
enterprises.6027.3.10.1.2.10.1.2.1.2 = "/CORE_DUMP_DIR/FTP_STK_MEMBER/
f10cp_l2mgr_131108080758_Stk1.acore.gz"
enterprises.6027.3.10.1.2.10.1.2.1.3 = "/CORE_DUMP_DIR/FTP_STK_MEMBER/
f10cp_vrrp_140522124357_Stk1.acore.gz"
enterprises.6027.3.10.1.2.10.1.2.2.1 =
"/CORE_DUMP_DIR/FTP_STK_MEMBER/f10cp_sysd_140617134445_Stk0.acore.gz"
enterprises.6027.3.10.1.2.10.1.3.1.1 = "Fri Mar 14 11:51:46 2014"
enterprises.6027.3.10.1.2.10.1.3.1.2 = "Fri Nov 8 08:11:16 2013"
enterprises.6027.3.10.1.2.10.1.3.1.3 = "Fri May 23 05:05:16 2014"
Simple Network Management Protocol (SNMP)
877

Dell S4048-ON Specifications

General

Uplink Ports	6 x 40GbE QSFP+
Rack Units	1U
Product Type	Data Center Switch
Form Factor	Rack-mountable
Switching Capacity	1.44 Tbps
Power Supply	Dual, hot-swappable
MAC Address Table Size	128, 000 entries
Jumbo Frame Support	Yes
Features	VXLAN
Management	CLI, SNMP, Web