EasyManua.ls Logo

Dell S4048-ON - Page 87

Dell S4048-ON
1146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ash0 — to boot from ash partition A.
ash1 — to boot from ash partition B.
tftp://server-ip/image-le-name — to boot from the network.
4 Assign an IP address to the Management Ethernet interface.
uBoot mode
=> setenv ipaddr ip_address
For example, 10.16.150.105.
=> setenv netmask mask
For example, 255.255.0.0.
5 Assign an IP address as the default gateway for the system.
uBoot mode
=> setenv gatewayip gateway_ip_address
For example, 10.16.150.254.
6 Save the modied environmental variables.
uBoot mode
=> saveenv
7 Reload the system.
uBoot mode
reset
Management
87

Table of Contents

Related product manuals