3 Installation
The chapter contains instructions for
(1) Mechanical installation
(2) Electrical Installation
(3) Communication setup
Unpacking the inverter, please follow the procedure shown as Figure 3-1.
It could be transported by 2 people (Figure 3-2) .
3.1 Unboxing & Review
Figure 3-1: The step to unpacking the inverter
- Need more than two people to stand up.
- It is recommended to install the
grounded brackets first at this step f
or ground
mount installation
.
For detailed installation methods,
please see section 3.2.
CAUTION !
17
Installation
To Next Page
Loading...
