E105, 313327, REV A Protocol 3
TM
User Guide
©2021 ITW EAE. All rights reserved. Despatch is a registered trademark in the U.S. and other
countries. No part of the contents of this manual may be reproduced, copied or transmitted in any form
or by any means without the written permission from ITW EAE, unless for purchaser's personal use.
6.5. USB Menu
Use USB Menu to perform read/write options for USB devices connected to the
unit using the front USB port (Figure 23). Access the USB Menu from the Main
Menu. See Table 15 for USB Menus options.
Regularly backup critical system data according to your company
policies. Be sure to back up configuration and profiles to a
removable memory device. Refer to Section 6.5.1 for more
information.
Note that a memory stick must be in place before the USB Menu
will display.
1. Navigate to and highlight USB Menu.
2. Press to display Mode Unlock Code screen.
3. Press as necessary to enter Factory Unlock Code 0010.
4. Press to display the USB Menu screen.
Table 15. USB Menu Options.
To Next Page
Loading...
Need help?
General
