©2021 ITW EAE. All rights reserved. Despatch is a registered trademark in the U.S. and other
countries. No part of the contents of this manual may be reproduced, copied or transmitted in any form
or by any means without the written permission from ITW EAE, unless for purchaser's personal use.
6.9. Service Information
Access Service Information (Figure 28) through the Main Menu (Section 6.2.4).
The Service Information menu displays contact information for service, sales or
technical support.
6.10. Remote Operation
The Protocol 3 controller is equipped for remote operation using the Despatch
Protocol Manager software. A PC running Despatch Protocol Manager software
can access, operate and log data for up to 32 Protocol 3/Protocol Plus-equipped
ovens.
See the Protocol Manager Instruction Manual for complete operation
instructions.