G6 Pro User Guide
92Appendix A: FAQs and Troubleshooting
Adhesive Patch Won’t Stick
Problem
The adhesive patch is peeling off.
Action
Overpatch
Put overpatch or medical tape (such as
Blenderm™) over the adhesive patch.
To order overpatch, call Technical Support.
Do not put tape over the transmitter.
Prevent peeling before inserting the
sensor by:
• Using adhesive products (such as
Mastisol
®
, Skin Tac™, etc.) under
the patch.
• Thoroughly rubbing the patch
onto skin.
Medical Tape
To Next Page
Loading...
