dji MATRICE 4 Series - Page 88

Specications Description
Oblique GSD Oblique GSD is the ground sampling distance of the obli-
que photos captured by the remaining four routes, i.e.,
the distance between two consecutive pixel centers meas-
ured on the ground. The larger the Oblique GSD value, the
lower the resolution of the oblique photos. The Oblique
GSD value will be changed accordingly when changing the
ight route altitude.
Single Route If the Single Route is enabled, a route in the center of the
mapping area will be generated. This function is suitable
for scenes where only the center of the mapping area
needs to be photographed, such as an oil pipeline inspec-
tion.
Extension Length Plan the range of the ight band by adjusting the distance
that the route expands from the center to the left and
right sides. After enabling Equal Left/Right Extensions, the
range of the ight band remains symmetrical compared
to the center of the route.
Flight Band Cutting Distance Adjusting the cutting distance of the ight band can divide
the band area into several small areas for operation. The
communication range of the aircraft should be mainly
considered for the division range, ensuring that the air-
craft will not lose control in a small area.
Include Center Line If enabled, ight routes are generated outwards along the
center line. This route will ensure that the center line of
the band-shaped mapping area is included.
Boundary Optimization Add new ight routes outside the current planning ight
area to take more photos of the edge of the mapping
area. Turn on for objects that mainly capture edge areas,
such as river channels.
Flight Route Direction The slope route can be executed vertically or horizontally.
It is recommended to select the orientation based on the
surrounding environment of the target.
Rotation Angle Rotation angle of ight routes relative to geometric struc-
ture. Adjust Route Coverage Rate and Rotation Angle to
realize mapping for specic face.
Route Coverage Rate Coverage rate of ight routes on lateral faces of geometric
structure. Adjust Route Coverage Rate and Rotation Angle
to realize mapping for specic face.
DJI Matrice 4 Series User Manual
88 © 2025 DJI All Rights Reserved.