DS-320SA
Instruction Manual - 19 -
www.doallsaws.com
5.6.1 SAFETY COMPONENTS
WARNING: The operator is endangered by the rotating or movable parts of the machine. It is
prohibited to remove safety covers during machine operation and stop safety, protective and ensuring
arrangements !
EMERGENCY STOP button stops all controlling circuits
of the machine and band movement. After pressing the
EMERGENCY STOP button, the controlling circuits are
still charged with electric current.
Press the EMERGENCY STOP button immediately in
case of any failure or possible danger.
To release or reset the EMERGENCY STOP button,
rotate the button head clockwise until the head pops up.
pic: 5-5
The blade cover of movable band guide.
Cutting without the cover is prohibited!
pic: 5-6
The pulley cover.
Make sure all four clips on the pulley cover are closed
properly before starting to cut.
WARNING: Due to safety regulations, it is
prohibited to loosen clips and open the pulley covers
when the machine is operating.
pic: 5-7
To Next Page
Loading...
