DS-320SA
Instruction Manual - 30 -
www.doallsaws.com
9.2.2 MENU
Following screen will appear after pressing the MENU button.
pic: 9-4
Item.
Description
1
User parameters
2
Manual saw control: This screen allows the basic saw motions to be controlled. It can
be used, for instance, if the keypad has failed. only for authorized personnel (service
technician), access under service password.
3 Free
4
Information screen: Data of of the last cutting cycle (date, time, total time of running,
kind of ending of the cycles, quantity of the cutting cycles)
only for authorized personnel (service technician), access under service password.
5
Input function control
only for authorized personnel (service technician), access under service password.
6
Setting the levels for measurement
7
Service parameters
only for authorized personnel (service technician), access under service password.
8
Inputs setting (mapping)
only for authorized personnel (service technician), access under service password.
9
Outputs setting (mapping)
only for authorized personnel (service technician), access under service password.
10
Settings: date, time, language
only for authorized personnel (service technician), access under service password.
11 Free
12
Back button
one step back in browsing between the screens
9.2.3 NUMERIC KEYPAD
pic: 9-5
Description
ESC – go back
AC:
DEL: deletion of the set value
ENT: enter
To Next Page
Loading...
