DS-320SA
Instruction Manual - 33 -
www.doallsaws.com
9.4 /2.MAN/ MANUAL SAW CONTROL
Manual saw control
pic: 9-10
Under user´s password (123456) and it´s used in case of blade changing or error message W003 (bleaking
or loosing the blade).
Machines with hydraulic blade tightening, which have service mode: It is possible to handle with machine by
following screen buttons, even though the blade covers are open:
Pic: Description
The buttons control the hydraulic system START / STOP
the UP arm travel
the DOWN arm travel
vice OPENING
vice CLOSING
To Next Page
Loading...
