DoAll DS-320SA - 11. INFORMATION ABOUT THE BLADE; 11.1 TENSIONING OF THE SAW-BAND

DS-320SA
Instruction Manual - 45 -
www.doallsaws.com
11. INFORMATION ABOUT THE BLADE
11.1 TENSIONING OF THE SAW-BAND
The band is correctly tensioned when the light on the control panel
is active.
The band is tensioned by tightening tensioning screw A on the front
part of the saw arm.
After turning on the saw, the band must move in the direction of
the arrow.
Composition of springs in tensioning
mechanism.