DoAll DS-320SA - 14.4 ADJUSTING THE HYDRAULIC PUMP PRESSURES:; 14.5 SETTING PRESSURES

DS-320SA
Instruction Manual - 69 -
www.doallsaws.com
14.4 ADJUSTING THE HYDRAULIC PUMP PRESSURES:
1. main pressure – preset from the factory, not necessary to change
2. saw-band tensioning pressure – with tensiometer
3. main vice jaw pressure – adjust according to the size and weight of the material; the lower the pressure,
the longer the life of mechanical parts of the vice.
14.5 SETTING PRESSURES
The pressures are pre-set in the factory – we strictly recommend no change. Leave potential adjustment to
the maintenance service.
machine Band saw BLADE TIGHTENING (pressure)
CUTTING FOR LIFE OF MACHINE and
BAND**
Main pressure
Strain gauge
STARRETT
VOLUME ON SCALE
PSI
PSI
DS-320SA
238-1/2 24000-25000 275 - 290
tab: 14-1