DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 90 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
4.5. Install Exhaust tubing into manifold.
4.6. Ensure exhaust tubing is fully seated.
5. Verify exhaust tubing is properly installed for the system.
6. Remove Lockout/Tagout equipment and apply power to the system.
7. Verify the system is operating properly with no exhaust leaks. Contact DOD service for support if required.
To Next Page
Loading...