Dodge D250 1990 - Electric Fuel Shut off Valve - Replacement; Oil Pressure Switch - Replacement

Engine Electrical System Replacement Procedures
Page 8-14
Electrical System
DODGE Turbo Diesel
Electric Fuel Shut Off Valve - Replacement
j^J 8mm
Remove the electrical wire from the valve. Clean the area
around the valve thoroughly.
IS
Mnra
A
Caution: When removing the valve, be careful not to drop
_ the piston and spring from inside the valve housing.
Replace the valve and connect the electrical wire.
Torque Value: 43 N-m [32 ft-lbs]
Oil Pressure Switch - Replacement
H
Remove the electrical connector from the switch. Clean the
area around the switch thoroughly.