Dodge D250 1990 - Rear Crankshaft Seal Housing and Seal Replacement

Out-of-Chassis Repairs
Page 91-28
Base Engine Components
DODGE Turbo Diesel
(^^) The crankshaft end clearance limits are:
Crankshaft End Clearance
mm in
0.13
0.30
MIN
MAX
0.005
0.012
Of Rear Crankshaft Seal Housing and Seal
Replacement
8mm
Remove the rear seal housing and gasket.
Hammer, Pin Punch
Support the seal area of the rear seal housing and press/drive
out the seal.
Clean the rear seal housing.
2sJ Rear Seal Housing - Installation
Clean and dry the rear crankshaft sealing surface.
Note: The seal lip and the sealing surface on the crankshaft
must be free from ail oil residue to prevent seal leaks.