Dodge D250 1990 - Gear Housing and Gasket Replacement

Out-of-Chassis Repairs
Page 91-30
Base Engine Components
DODGE Turbo Diesel
Remove the seal pilot.
A
Caution: Alternately, drive the seal at the 12, 3, 6 and 9
O'clock positions to prevent bending the seal carrier
during Installation.
Use the alignment and installation tool packaged in the seal kit.
Drive the seal into the housing until the driver bottoms.
I) Gear Housing and Gasket - Replacement
After removing front end components and the gear cover,
remove the following:
- Camshaft
• Gear driven accessories
• Fuel Pump
• Fan hub assembly
10mm
Remove the gear housing and gasket.