Introduction
CHRYSLER
MOTORS
Page 16 DODGE Turbo Diesel
Metric
System
Artwork,
specifications, and
tightening
references in this Service
Manual
are
identified
in the metric system and in
the [standard-inch] system.
During any maintenance or repair procedures, it is
important
to salvage metric fasteners (nuts, bolts, etc.) for
reassembly. If the fastener Is not salvageable, a fastener of equivalent specification should be
used.
Caution: Use of an incorrect fastener may result in component damage or personal injury.
The metric system is based on quantities of one, ten, one hundred, one
thousand,
and one million.
Metric
Prefixes
Mega-
(M) means
million
Kilo-
(K) means thousand
Deci-
(D) means
tenth
Centl-
(C) means hundredth
Mill!
- (M) means thousandth
To Next Page
Loading...
