Dodge D250 1990 - Engine Replacement - Procedure

Engine Removal, Replacement and Testing
Page9J-4
Base Engine Components
DODGE Turbo Diesel
Engine Replacement - Procedure
Caution: Do not exceed the torque value for the engine
supports.
Torque Value: 77 N-m [57 ft-lb]
Check the data plate to verify that the replacement engine is
the same model and rating as the engine that was removed.
Note: Install all accessories and brackets that had been
removed from the previous engine.
Use the lifting eyes to lift the engine. Keep tension on the hoist
while you align the engine in the chassis and tighten the engine
mounts.
Connect the engine and chassis parts in the reverse order of
removal.
When connecting the cable/rod to the control lever, adjust the
length so the lever has stop-to-stop movement.