Dodge D250 1990 - Page 252

Base Engine Components
DODGE Turbo Diesel
In-Chassis Repairs
Page9F-23
13mm
Caution; Be sure to lubricate the push rod sockets with
clean engine oil.
Install the rocker lever pedestal capscrews.
Torque Value: 24N-m [18 ft-lbs]
14mm, Screwdriver
Adjust the valve clearance.
Note: Refer to Valve Clearance Adjustment Section for valve
set procedure.
15mm
Install the valve covers.
Torque Value: 24 N-m [18 ft-lbs]
Install the parts previously removed:
• Valve covers
• Injector Nozzles
- Fuel lines
• Fuel Alter
• Exhaust manifold
• Turbocharger and air crossover
• Connect the radiator and heater hoses
• Fill the engine with new coolant and oil