Dodge D250 1990 - Page 321

Out-of-Chassis Repairs
Page 91-34
Base Engine Components
DODGE Turbo Diesel
T-25TOI*
[|||| install the timing pin assembly. Apply a coat of Loctite 59241
liquid teflon to the threads of the torx headscrews.
Push the pin into the hole in the cam gear to align the housing.
Hold the pin in while tightening the torx headscrew.
Torque Value: 5 N-m [44 in-lbs]
|^ | 10mm, 15mm
A
Caution: Be sure timing pin is disengaged before rotating
the engine.
Remove the vibration damper and wire pointer.