Dodge D250 1990 - Page 71

Recommended Lubricants, Fuels and Fluids
Page OH-2
Lubrication and Maintenance
DODGE Turbo Diesel
Recommended Lubricants, Fuels and Fluids
1. Fuel
No. 2 Diesel Fuel
No. 2 Climatized Diesel Fuel
No. 1 Diesel Fuel
Note: No. 1 Diesel Fuels should only be used in extended Arctic conditions, -23°C [-10°F] and below.
2. Engine Oil*
A.P.I. Quality CE-SG, CE-SF, CD-SF, or CC/CD-SF
Max sulfated ash content of 1.85% mass is recommended for all oil used in this engine.
Operating Temperature
MOPAR P/N 4467720 0.95 liter [1 U.S. quart]
15W-40* Above-10°C [14<>F]
MOPAR P/N 4467718 0.95 liter [1 U.S. quart]
10W-30 -10°C [14°F] to -23°C [-10°F]**
**Note: with Block Heater.
3. Automatic Transmission Fluid*
MOPAR ATF Plus. (Automatic Transmission Fluid Type 7176)
MOPAR P/N 4467721 ....... 0.95 liter [1 U.S. quart]
Note: If above is not available use MOPAR Dextro II.
4. Manual Transmission Oil*
5W-30 Engine Oil
MOPAR P/N 4467717 ....... 0.95 liter [1 U.S. quart]
Note:lf not available use; SAE 5W-30 (A.P.I. Classification for service SG or SG1CD).
5. Antifreeze*
MOPAR P/N 4267020
Note: If not available use; Prestone II, Peak or antifreeze containing Alugard 340-2 inhibitor system.
6. Power Steering Fluid*
MOPAR Power Steering Fluid P/N 4318055
Note: Do not use Gear Oil, Automatic Transmission, or Hydroboost Power Steering Fluid.
7. Drive Line/Slip Spline*
MOPAR P/N 4318063
Moly Disulfide Grease (NLGI Grade 2 EP)
8. Rear and Front Axles (Conventional and Limited Slip Differentials)*
MOPAR Hypoid Lubricant. (A.P.I. Specification GL-5)
MOPAR P/N 4318058
SAE 80W-90 ..................................... 0.95 liter [1 U.S. quart]
Limited Slip Differential add:
MOPAR P/N 4318060 118 milliliters [4 ounces]
Recommended SAE Grade Anticipated Temperature Range
SAE 140, SAE 80W-140, SAE 85W-140 Above 32°C [90°F]
SAE 90, SAE 80W-90, SAE 80W-140, SAE 85W-140 32°C [90°F] to -23°C [-10°F]
SAE 75, SAE 75W-90, SAE 80W, SAE 80W-140 Below -23°C [-10°F1