Figure 101: Setting up Dolby Atmos Connect for CP950/CP950A
If you are integrating with devices supplied by any party other than Dolby, you can check advanced mode
and enter source and destination Real-time Transport Protocol (RTP) settings for channels 1-8 and 9-16 on a
CP950 and channels 1-8, 9-16, 17-24, 25-32, and 33-40, 41-48, 49-56, and 57-64 on a CP950A, as shown in the
following figures.
Figure 102: Setting up Dolby Atmos Connect advanced mode for CP950
Modifying the network settings
Dolby Cinema Processor CP950 and Dolby Atmos Cinema Processor CP950A Manual 75
Issue 9 Part Number 8800298 19 January 2022
To Next Page
Loading...
