OPERATION
EPT024619 Issue 1 June 2016 3-69
Using an Android Device
To update a logo from an Android device:
(1) Open the G20i Application on the Android device.
(2) Select logo.
(3) Select update logo.
(4) Select Choose image...
(5) Select the image to be used from the Android device’s memory.
(6) If needed, adjust the Threshold, Height and Width sliders until the
quality and size of the previewed logo is acceptable.
(7) Select Use this image.
(8) Select a logo number between 1 and 4 to save the logo.
(9) Select Update logo.
To Next Page
Loading...
Need help?
General
